- 1 ΗΜΕΡΑ
- 70€
- 3 ΗΜΕΡΕΣ
- 140€
- 7 ΗΜΕΡΕΣ
- 245€
ΟΙ ΤΙΜΕΣ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΟΥΝ ΦΠΑ 24%
Δημιούργησε την παραγγελία σου!
Πρόσθεσε τα προϊόντα που θέλεις να ενοικιάσεις και συμπλήρωσε τις ημερομηνίες. Θα επικοινωνήσουμε μαζί σου για την επιβεβαίωση της διαθεσιμότητας.
Τηρείται σειρά προτεραιότητας!
- CATEGORIES
- MONITORING
- MONITOR TYPE
- WIRELESS TRANSMISSION
- BRAND
- TERADEK
- 1xTeradek Bolt 500 XT Transmitter
- 1xTeradek Bolt 500 XT Receiver
- 2xAntennas
- 1xTeradek A/C Power Cable
- 3xD-Tap LEMO Cables
- 3xSDI Short Cables
- 2xHDMI Full-Full Cables
- 2xMini Magic Arm
- 1xMini Clamp
The Bolt 500 3G-SDI Video Transmitter from Teradek transmits visually lossless video up to 500' with no delay. Within the unlicensed 5 GHz channel range, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the transmitter supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware. The built-in HDMI to SDI converter allows you to connect both your on-camera monitor and video source via the same device, thereby making Bolt 500 suitable for use with MoVI and other separately available gimbals.
- Up to 500' Range
- 1 x Transmitter and 2 x Receivers
- Transmits up to 1080p60
- Near-Zero Latency
- SDI on Transmitter and Receiver
- Transmit to up to 4 Receivers
- USB 3.0 GRAB Engine
- Eleven 5 GHz channels
- Supports full HD (1080p) resolution
- Low latency of up to 0.001 sec
- Integrated 3D LUT technology
- Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
- Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
- Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
- Housed in a hardened aluminum chassis
- 1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power
| Video Inputs | 1 x 75 Ohms BNC |
|---|---|
| Video Outputs | 1 x 75 Ohms BNC (loop-out) |
| Input / Output | 3G-SDI |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) |
| Latency | <0.001 seconds |
| Delay | <0.001 sec (when no video format conversion is enabled) |
| Supported Resolutions | 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 1080p sf23.98 / 24 / 25 / 29.97 / 30 1080i 50 / 59.94 / 60 720p 50 / 59.94 / 60 480p 59.94 / 576p 50 (via HDMI ports only) 480i (NTSC) / 576i (PAL) |
| Video Compression | Visually lossless |
| Color Correction | CDL/1024 1D LUT (supports 10-bit color) 33 x 33 x 33 3D LUT (supports 10-bit color) |
| Frequency | Non-DFS Frequencies: 5.19 to 5.23 GHz 5.755 to 5.795 GHz DFS Frequencies: 5.27 to 5.55 GHz 5.67 GHz |
| Channel Selection | Auto |
| RF Power | 17 dBm EIRP |
| Range | Up to 500' (152 m) |
| Encryption | AES-128 |
| Audio Compression | 48 kHz 24-bit PCM |
| Audio Input | Embedded |
| Switches | On/Off Reset Switch |
| Application | Bolt Manager Application for OSX & Windows |
| Noise Rejection | Can coexist with Wi-Fi and 5 GHz cordless phones |
| Construction | Milled aluminum (chassis) and regulation-compliant PCB Plastic cap |
| Power Input Connector | 2-pin 7 to 28 VDC |
| Power Consumption | 7.3 W nominal @ 1080p |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Dimensions | 1.0 x 2.6 x 4.0" (2.4 x 6.6 x 10.2 cm) |
| Weight | 7.6 oz (217 g) |
